Me with the Möhne Dam Test Model. |
For many years I had wanted to visit the BRE's Möhne Dam Test Model, at their site in Watford. This is because of a fascination with The Dambusters, which partly stems from the fact that a relative of mine was a Dambuster.
Len and I arrived at the BRE site just before 10:00 and, after parking the car, joined a small group of people who had also come to see the model. We were given a quick introduction by Peter White, BRE Marketing and Communication Manager, before he led us past some of the BRE test buildings and in to a wooded area, in the centre of the site. Here, our group, of about a dozen, listened intently as Peter began to explain why the test model was built, how it was built, and by whom, with the aid of some large 'A' boards, which had further information and photographs on them.
Möhne Dam |
When we reached the model itself, we were allowed to walk all around it and explore the local area. A muntjac deer peered through the trees, while a green woodpecker flitted through the branches, as I took photographs of the dam, from all angles.
The Prince's House |
We then wandered back down to the model, before looking at some of the BRE test houses, that range from the 1960s through to the ECO-friendly houses, of the 21st century.
BRE Test Houses |
On our way out of the site, I managed to get a photo of Bucknalls House. Bucknalls is a Victorian house, built in 1855 for Henry Creed, that stood at the centre of the 180 acre Bucknalls estate. Frank Thomas, the last owner of the house, made substantial extensions to the building, during 1878 and 1903. The estate itself was sold off in six lots, in 1924.
Bucknalls House |
Brief History.
It all began back in 1938 when, even before World War II had begun, Dr Barnes Wallis came up with the idea of destroying the dams of the Ruhr valley with a ten-ton bomb, dropped from a height of 40,000 feet. The bomb would bury itself in the ground and cause a massive 'earthquake' that would destroy the dams. There were three problems with this scenario:
- No bomb of that size could be manufactured
- If it could be manufactured no aeroplane could carry it
- No current aeroplane could fly anywhere close to that height
In October 1940 Dr Wallis was invited to a secret meeting with Norman Davey and William Glanville, where it was discussed that a scale test model should be built and tested, to see exactly what size charge would breach the dam.
Möhne Dam Schematics |
On Monday November 25, 1940 work began on clearing and excavating the site. The stream was widened and deepened and channelled through a pipe, that would flow beneath the dam. On Friday 29, the concrete foundation was poured, with the towers being cast on the following Monday December 2. The side wings were then added.
Under Construction |
The model took four men, Norman Davey, A J Newman, A B Stapleton & A Smith, just 7 weeks to complete and, considering that the British winter was particularly harsh, with temperatures close to, or below, freezing on some days, this was no mean feat. Roughly 2 million scaled bricks measuring 0.4 inches long x 0.3 inches wide and 0.2 inches deep (10.2 x 7.6 x 5.1mm) were used to build the model, along with poured concrete.
Where the charges were placed |
After the eighth detonation the model was damaged, which allowed water to seep through some cracks. After the tenth detonation the model was severely damaged.
The 8th detonation 'cracked' the dam |
These were the first, and only, tests to be conducted on the dam. All further tests were completed at RRL Harmondsworth, using cast concrete dams. These tests made it possible to work out that a 7,000 lb bomb, placed against the side of the Möhne Dam, would be enough to breach it.
The model was then left to the elements and remained secret, until 1954, when the Air Ministry issued a news release.
Air Ministry News Release, 1954 |